Wet Lay-Up
Open-mold processing for repair, prototypes and low-volume laminates.
Woven fabric, UD fabric, hybrid fabric
Send process RFQ 04 / 08
Processes
Choose carbon fiber materials by manufacturing route.
The same fiber can behave differently in lay-up, infusion, prepreg molding, pultrusion, winding, machining or compounding. Start with the process to narrow material format and RFQ details.
Process finder
Manufacturing process to material shortlist.
Use these routes as a first-pass selection guide before engineering validation, sampling and production qualification.
Vacuum Infusion
Dry reinforcement stacks infused with resin under vacuum.
Woven fabric, NCF, UD fabric
Send process RFQ 
Prepreg / Autoclave Molding
Controlled resin content and cure cycles for repeatable laminate quality.
Woven prepreg, UD prepreg, spread tow prepreg
Send process RFQ 
Compression Molding
Matched tooling for repeat CFRP parts and higher-throughput components.
Prepreg, chopped fiber compounds, custom laminates
Send process RFQ 
Pultrusion
Continuous profiles, plates, rods and tubes with stable fiber alignment.
Carbon fiber tow, UD fabric, CFRP plate systems
RFQ details
Send process RFQ - Profile shape
- Width / thickness / OD / ID
- Fiber grade
- Resin system
- Required tensile strength / modulus
- Length
Filament Winding
Tow-based winding for tubes, pressure structures and rotational components.
Carbon fiber yarn and tow
RFQ details
Send process RFQ - Tow size
- Fiber grade
- Sizing type
- Resin system
- Winding application
- Required strength / modulus
Weaving & Braiding
Textile conversion routes for woven fabric, sleeve, tape and specialty reinforcement.
1K-50K yarn and tow, PAN precursor materials
Send process RFQ CNC Machining
Sheet, plate and laminate cutting for frames, brackets and precision CFRP parts.
CFRP sheets, laminate plates, custom components
RFQ details
Send process RFQ - Drawing upload
- Material thickness
- Tolerance
- Hole size / slot / contour requirement
- Surface finish
- Quantity
Plastic Compounding
Short fiber and powder addition for strength, conductivity and dimensional control.
Chopped carbon fiber, milled carbon fiber powder
RFQ details
Send process RFQ - Fiber length
- Powder size / mesh
- Sizing type
- Polymer system: PA / PP / PEEK / PPS / ABS / PC
- Target performance: strength / conductivity / dimensional stability
- Processing method: extrusion / injection molding
Production equipment
Weaving, creel and warp preparation scenes.
Equipment photos help sourcing and engineering teams understand the production route behind dry carbon fiber fabric before sampling or scale-up.
Comparison table
RFQ details change by process.
The form on the RFQ page captures product-specific fields; use this table to prepare the process context.
| Process | Typical material starting point | RFQ details to prepare |
|---|---|---|
| Wet Lay-Up | Woven fabric, UD fabric, hybrid fabric | Process, application, dimensions, quantity and destination country |
| Vacuum Infusion | Woven fabric, NCF, UD fabric | Process, application, dimensions, quantity and destination country |
| Prepreg / Autoclave Molding | Woven prepreg, UD prepreg, spread tow prepreg | Process, application, dimensions, quantity and destination country |
| Compression Molding | Prepreg, chopped fiber compounds, custom laminates | Process, application, dimensions, quantity and destination country |
| Pultrusion | Carbon fiber tow, UD fabric, CFRP plate systems | Profile shape · Width / thickness / OD / ID · Fiber grade · Resin system · Required tensile strength / modulus · Length · Quantity · Surface treatment · Destination country |
| Filament Winding | Carbon fiber yarn and tow | Tow size · Fiber grade · Sizing type · Resin system · Winding application · Required strength / modulus · Quantity · Destination country |
| Weaving & Braiding | 1K-50K yarn and tow, PAN precursor materials | Process, application, dimensions, quantity and destination country |
| CNC Machining | CFRP sheets, laminate plates, custom components | Drawing upload · Material thickness · Tolerance · Hole size / slot / contour requirement · Surface finish · Quantity · Application |
| Plastic Compounding | Chopped carbon fiber, milled carbon fiber powder | Fiber length · Powder size / mesh · Sizing type · Polymer system: PA / PP / PEEK / PPS / ABS / PC · Target performance: strength / conductivity / dimensional stability · Processing method: extrusion / injection molding · Quantity |
Request specifications or pricing
Tell us your material requirement.
Share the product, fiber grade, weave, width, areal weight, quantity and application. Our team will review the details and respond with a practical quotation or material suggestion.
Send Inquiry