Select carbon NCF architecture and prepare the RFQ
Compare documented biaxial and quadraxial constructions, then confirm direction, weight, width, stitching, process and quantity.
View Carbon Fiber Multiaxial NCF Fabric05 / 08
Technical Center
Carbon fiber data, documents and selection guidance.
Use this center to compare product data, prepare RFQs, request TDS / SDS / COA files and connect material choices to manufacturing processes.
Priority buyer pathways
Move from product selection to a complete RFQ.
Start with the relevant commercial page, then use the connected guides and verified documents to define the order. Published references do not replace final specification, batch documentation or application engineering review.
Define 3K plate thickness, finish and CNC scope
Separate visible 3K laminate requirements from structural pultruded plate and prepare a drawing-led sheet or CNC quotation.
View 3K Carbon Fiber Laminate SheetSpecify tow size, source grade and conversion process
Use the documented 12K supply reference while keeping grade, sizing, bobbin, process, quantity and traceability explicit in the RFQ.
View Carbon Fiber Yarn & TowCompare documented 200gsm and 300gsm UD references
Review dry-fabric construction and RFQ fields without treating gsm or nominal dry thickness as cured-system design values.
View UD Carbon Fiber FabricChoose between pultruded plate and UD fabric systems
Connect the 1.2 mm plate and UD fabric references to substrate, adhesive, dimensions, engineering responsibility and document needs.
View Carbon Fiber Structural Strengthening SystemSelect 3K woven construction and prepare the fabric RFQ
Confirm tow, weave, areal weight, width, roll format, resin process and visible-surface requirements using the verified 200gsm reference.
View Woven Carbon Fiber FabricTechnical guides
Practical guides for material selection.
Guides summarize common selection factors. Final material approval should be based on customer testing, process validation and official documents.
3K vs 12K Carbon Fiber Fabric
Compare 3K and 12K carbon fiber fabric by appearance, areal weight, laminate build-up, handling and common applications.
Read guide
3K 200gsm Carbon Fiber Fabric RFQ Guide
Select 3K 200gsm twill carbon fiber fabric and prepare an RFQ covering weave, width, roll length, surface target, resin process, quantity and end use.
Read guide
Plain vs Twill Carbon Fiber Fabric
Compare plain weave and twill weave carbon fiber fabric for drape, stability, surface appearance and RFQ selection.
Read guide
Spread Tow vs Traditional Carbon Fiber Fabric
Compare spread tow carbon fabric with traditional woven carbon fiber fabric for checker pattern, thickness, surface appearance and process selection.
Read guide
UD Carbon Fiber Fabric vs Woven Carbon Fiber Fabric
Compare unidirectional carbon fiber fabric and woven carbon fiber fabric by fiber direction, load path, handling and application.
Read guide
Prepreg vs Dry Carbon Fiber Fabric
Compare prepreg carbon fiber materials and dry carbon fiber fabric by resin content, storage, process control and application.
Read guide
Carbon Fiber Yarn vs Tow vs Roving
Understand carbon fiber yarn, tow and roving terms for weaving, braiding, winding, pultrusion, prepreg and chopping applications.
Read guide
Carbon Fiber Tow Size Guide: 1K to 50K
Compare 1K, 3K, 6K, 12K, 24K, 48K and 50K carbon fiber tow for weaving, braiding, winding, pultrusion, prepreg conversion and RFQ preparation.
Read guide
Chopped Carbon Fiber vs Milled Carbon Fiber Powder
Compare chopped carbon fiber and milled carbon fiber powder for plastic reinforcement, resin modification, conductivity and compound selection.
Read guideHow to Choose Carbon Fiber Fabric by GSM
Choose carbon fiber fabric by areal weight, tow size, weave, laminate thickness and application requirements.
Read guide
Roll-Wrapped vs Pultruded Carbon Fiber Tube
Compare roll-wrapped and pultruded carbon fiber tubes by process, fiber orientation, appearance, cost and application.
Read guide
CFRP Plate vs Carbon Fiber Fabric for Structural Strengthening
Compare pultruded CFRP plates and UD carbon fiber fabric for concrete, bridge and building strengthening systems.
Read guideCarbon Fiber Fabric for Vacuum Infusion
Choose woven, UD, multiaxial or spread tow carbon fiber fabric for vacuum infusion and prepare a practical reinforcement RFQ.
Read guide
300gsm vs 600gsm Biaxial Carbon NCF Selection Guide
Compare verified 300gsm and 600gsm biaxial carbon NCF by orientation, layer weight, roll format, stitching and RFQ requirements.
Read guideCarbon Fiber Multiaxial NCF RFQ Checklist
Prepare a complete RFQ for UD, biaxial, triaxial or quadriaxial carbon NCF with the directions, weight, width, stitch and resin process suppliers need.
Read guideBiaxial vs Triaxial vs Quadriaxial Carbon NCF
Compare biaxial, triaxial and quadriaxial carbon NCF architectures by fiber direction, laminate planning and RFQ requirements.
Read guide
Carbon Fiber Plate Thickness Selection Guide
Select a 3K carbon fiber laminate sheet thickness by part geometry, layup, finish, tolerance and CNC requirements without confusing it with pultruded strengthening plate.
Read guide
3K Carbon Fiber Plate CNC and RFQ Guide
Prepare drawings and RFQ details for CNC-cut 3K carbon fiber plate, including finish, holes, tolerances, edge treatment and quantity.
Read guideMatte vs Glossy 3K Carbon Fiber Sheet
Compare matte and glossy 3K carbon fiber sheet finishes for appearance, handling, machining and RFQ preparation.
Read guide200gsm vs 300gsm UD Carbon Fiber Fabric for Strengthening
Compare documented 200gsm and 300gsm unidirectional carbon fiber fabric references for strengthening RFQs without treating dry-fabric data as project design values.
Read guide1.2 mm Pultruded CFRP Strengthening Plate RFQ Guide
Prepare a specification-first RFQ for documented 1.2 mm pultruded CFRP strengthening plate covering dimensions, bonding surface, structural epoxy, project quantity and engineering responsibility.
Read guide300gsm UD Carbon Fiber Fabric RFQ Guide
Prepare a specification-first RFQ for documented 300gsm unidirectional carbon fiber fabric covering direction, width, backing, fiber grade, resin process, quantity and final application.
Read guideCarbon Fiber Tow RFQ Checklist
Prepare a specification-first RFQ for 1K-50K carbon fiber tow covering grade, sizing, package, process, quantity, destination and final application.
Read guideCFRP Strengthening Material RFQ Checklist
Prepare an RFQ for structural-strengthening UD carbon fabric, pultruded CFRP plate and compatible epoxy without replacing project engineering review.
Read guideDocumentation
Request documents by product family and specification.
Documentation availability varies by material family, batch and order agreement.
Product Data Sheets
Construction, weight, width, fiber and recommended process information.
Request documentCertificates of Analysis
Batch-specific inspection results available according to product scope.
Request documentResin & Cure Guidance
Indicative mixing, cure, storage and handling recommendations.
Request documentTolerance Reference
Typical controls for areal weight, width, roll length and appearance.
Request documentStorage & Handling
Practical guidance for dry reinforcement, prepreg and resin systems.
Request documentPacking Documents
Commercial invoice, packing list, labels and supporting export files.
Request documentMaterial specifications, typical properties and recommended use.
Hazard information, handling guidance and safety measures where applicable.
Batch information and material characteristics when available for confirmed orders.
Downloadable TDS library
Verified product data sheets.
These files are prepared from available product records. Confirm the exact grade, construction, tolerance and batch document requirements in your RFQ.
TDS
3K 200gsm Twill Carbon Fiber Fabric
3K, 200 g/m², twill weave, 1000-1500 mm width
- Revision
- Rev. 01 / 2026-07
- Language
- English
- File
- PDF · 67 KB
TDS
300gsm UD Carbon Fiber Fabric
300 g/m² unidirectional reinforcement, 100-500 mm width
- Revision
- Rev. 01 / 2026-07
- Language
- English
- File
- PDF · 67 KB
TDS
200gsm UD Carbon Fiber Strengthening Fabric Supply Reference
200 g/m², 0° UD, 0.111 mm nominal dry-fiber thickness
- Revision
- Rev. 01 / 2026-07
- Language
- English
- File
- PDF · 68 KB
TDS
300gsm UD Carbon Fiber Fabric for Strengthening
300 g/m² unidirectional reinforcement for structural system review
- Revision
- Rev. 01 / 2026-07
- Language
- English
- File
- PDF · 67 KB
TDS
200gsm UD Carbon Fiber Strengthening Fabric Supply Reference
200 g/m², 0° UD, 0.111 mm nominal dry-fiber thickness
- Revision
- Rev. 01 / 2026-07
- Language
- English
- File
- PDF · 68 KB
TDS
1.2 mm Pultruded CFRP Strengthening Plate
1.2 mm pultruded CFRP plate; source model ZCP1.2
- Revision
- Rev. 01 / 2026-07
- Language
- English
- File
- PDF · 67 KB
TDS
300gsm Biaxial Carbon Fiber Fabric
+45° / -45° and 0° / 90° constructions
- Revision
- Rev. 01 / 2026-07
- Language
- English
- File
- PDF · 113 KB
TDS
600gsm +45/-45 Biaxial Carbon NCF
600 g/m² carbon basis, balanced +45° / -45°, 1270 mm × 50 m
- Revision
- Rev. 01 / 2026-07
- Language
- English
- File
- PDF · 68 KB
TDS
400gsm 0/+45/90/-45 Quadraxial Carbon NCF Supply Reference
400 g/m² carbon basis, four 100 g/m² layers, 408 g/m² total dry fabric
- Revision
- Rev. 01 / 2026-07
- Language
- English
- File
- PDF · 68 KB
TDS
High Strength 12K Carbon Fiber Tow
Supplier-grade reference for ZDCF 55T-12K continuous tow
- Revision
- Rev. 01 / 2026-07
- Language
- English
- File
- PDF · 67 KB
TDS
Carbon Fiber Prepreg - WP-L5100 System
UD and woven carbon prepreg with WP-L5100 epoxy resin
- Revision
- Rev. 01 / 2026-07
- Language
- English
- File
- PDF · 67 KB
TDS
300 Mesh Milled Carbon Fiber Powder
PAN-based carbon fiber powder, 300 mesh nominal grade
- Revision
- Rev. 01 / 2026-07
- Language
- English
- File
- PDF · 67 KB
SPEC
3K Carbon Fiber Laminate Sheet Product Specification & RFQ Guide
3K twill surface, finish, thickness, layup and CNC order-review checklist
- Revision
- Rev. 01 / 2026-07
- Language
- English
- File
- PDF · 68 KB
TDS index
Carbon fiber product data by material family.
Product pages include typical technical tables for RFQ preparation. Final values are confirmed by order specification, production batch, test method and official COA / TDS files.
| Product | Code prefix | Key specification | Page |
|---|---|---|---|
| UD Carbon Fiber Fabric | FRPH-UD | Fiber direction: 0 degree unidirectional | Published references: 200 g/m² strengthening supply reference; 300 g/m² product TDS | Documented width: 100-500 mm for the 300 g/m² product | Other constructions: By project specification and matching document review | View data |
| Woven Carbon Fiber Fabric | FRPH-WC | Documented product: 3K / 200 g/m² / twill | Documented width: 1000-1500 mm | Documented roll: 100 m nominal | Other constructions: Tow, weave, weight and width by order review | View data |
| Spread Tow Carbon Fiber Fabric | FRPH-ST | Pattern size: 8x8 mm / 10x10 mm; custom by review | Tow size: 12K / 24K; custom by specification | Fiber grade: T700 / custom by review | Areal weight: 100 / 160 / 200 / 240 / 300 / 600 g/m2; custom | Width: 1000 / 1270 mm; project width by review | View data |
| Carbon Fiber Multiaxial NCF Fabric | FRPH-MAX | Construction: UD / biaxial / triaxial / quadriaxial | Fiber angles: 0° / 90° / +45° / -45° | Documented formats: 300 / 600 g/m² biaxial NCF | Documented roll: 1270 mm x 50 m; other formats by review | View data |
| Carbon Aramid Hybrid Jacquard Fabric | FRPH-HYB | Hybrid type: Carbon/aramid, carbon/glass, jacquard carbon | Areal weight: 160-650 g/m² typical | Weave: Plain / twill / pattern / jacquard | Color: Black/yellow, black/red, black/blue and custom | View data |
| Aramid Fabric | FRPH-AF | Fiber: Para-aramid | Areal weight: 170-600 g/m² typical | Weave: Plain / twill / satin / hybrid | Width: 1000 / 1270 / 1500 mm; custom | View data |
| Carbon Fiber Structural Strengthening System | FRPH-CP | UD fabric: 200 g/m² supply reference; 300 g/m² product TDS | CFRP plate: 1.2 mm documented; width and length by quotation | Epoxy resin: Primer / saturant / plate adhesive by project | Structure type: Concrete / steel / masonry / bridge / building | View data |
| Prepreg Carbon Fiber Materials | FRPH-PP | Reinforcement: Woven / UD / spread tow / custom | Fabric type: 3K twill / plain / UD / spread tow | Fiber grade: T300 / T700 / T800 / custom | Resin system: Epoxy resin system / custom | Processing: Autoclave / hot press / compression molding / OOA | View data |
| 3K Carbon Fiber Laminate Sheet | FRPH-LP3K | Surface: 3K twill carbon fiber | Thickness: Order-specific; confirm by drawing and quotation | Finish: Glossy / matte / peel-ply / sanded | Size: Panel size or CNC geometry by drawing | View data |
| 3K Surface Carbon Fiber Tube | FRPH-RT3K | Surface: 3K twill / plain woven carbon | OD: 6-100 mm typical; custom | Wall thickness: 0.5-5.0 mm typical | Length: 500 / 1000 / 2000 / 3000 mm; custom | View data |
| Filament-Wound Carbon Fiber Tube | FRPH-FWCT | Process: Continuous-fiber filament winding | Fiber architecture: Hoop, helical and axial layers by design review | Diameter / wall / length: Custom by drawing and tooling review | Matrix and finish: Resin system and surface finish by application review | View data |
| Pultruded Carbon Fiber Tube | FRPH-PT | Process: Continuous pultrusion | Shape: Round, square, rectangular and custom profiles | OD / size: 3-80 mm typical; custom | Length: 1000-6000 mm or cut-to-length | View data |
| Milled Carbon Fiber Powder | FRPH-MCF | Form: Milled carbon fiber powder | Mean length: 30-300 µm typical | Fiber diameter: Approx. 7 µm typical carbon fiber | Packaging: Bag, carton or fiber drum | View data |
| Chopped Carbon Fiber | FRPH-CCF | Cut length: 3 / 6 / 12 / 25 mm; custom | Tow source: 3K / 6K / 12K / 24K / 50K options | Sizing: Epoxy, PA, PP, PEEK or custom compatibility | Packing: Bags, cartons, drums or supersacks | View data |
| Custom Carbon Fiber Products | FRPH-OEM | Product type: Plates, tubes, molded parts, assemblies | Process: CNC machining, layup, molding, bonding | Surface: 3K twill, UD, painted, matte or glossy | Input: Drawing, sample, target size or application | View data |
| Carbon Fiber Yarn & Tow | FRPH-CFY | Product type: Carbon fiber yarn / carbon fiber tow / carbon fiber roving | Tow size: 1K / 3K / 6K / 12K / 24K / 48K / 50K | Grade: T300 / T700 / T800 / high modulus / custom | Brand options: Selected Chinese and international brands by request | Package: Bobbin / spool / carton / pallet | View data |
Request specifications or pricing
Tell us your material requirement.
Share the product, fiber grade, weave, width, areal weight, quantity and application. Our team will review the details and respond with a practical quotation or material suggestion.
Send Inquiry